有机实验记录英文范例模板,可直接套用

Part 1: 反应前的装置描述

1.1: A 3 L three-necked round bottom flask equipped with mechanical stirrer (or magnetic stirrer), addition funnel and thermometer (or Dean-Stock; drying tube)

1.2: All flasks used in the reaction were heated under vacuum for 30 minutes and purged with N2 for 10 minutes. (无水反应装置)

 

Part 2: 加料

2.1: 不同的顺序和表达

2.1.1: A 3 L three-necked round bottom flask equipped with mechanical stirrer (or magnetic stirrer), addition funnel and thermometer (or Dean-Stock; drying tube) were charged with A

(10 mL, 1 mole), B (2 g, mole) and C (50 mL),

2.1.1.1: a solution of D (10 g, 1 mole) in E (20 mL) was added dropwise (via addition funnel or syringe) at 10oC (or while maintaining gentle reflux; while keeping inner temperature between 10oC –30oC) under N2 （液体滴加到反应液中）

2.1.1.2: D (10 g, 1 mole) was added in portions during a period of 1 hr (固体分批加入到反应液中)

2.1.1.3: D (10 g, 1 mole) and E (20 mL) were added in turn.

2.2: To a solution (mixture, suspension or slurry) of A (10 mL, 1 mole) and B (2 g, mole) in C (50 mL)

2.2.1: was added dropwise a solution of D (10 g, 1mole) in E (20 mL) with stirring at 10oC (or while maintaining gentle reflux; while keeping inner temperature between 10oC – 30oC) under N2

2.2.2: was added D (10 g, 1 mole) in portions duringa period of 1 hr

2.2.3: were added D (10 g, 1 mole) and E (20 mL) in turn

 

2.3:

2.3.1: A solution of D (10 g, 1 mole) in E (20 mL)was added dropwise into a solution (mixture or suspension) of A (10 mL, 1mole) and B (2 g, mole) in C (50 mL) at 10oC (or while maintaining gentle reflux; while keeping inner temperature between 10oC – 30oC) under N2.

2.3.2: D (10 g, 1 mole) was added into a solution(mixture or suspension) of A (10 mL, 1 mole) and B (2 g, mole) in C (50mL) in portions

2.3.3: D (10 g, 1 mole) and E (20 mL) were added into a solution (mixture or suspension) of A (10 mL, 1 mole) and B (2 g,mole) in C (50 mL) in turn

 

2.4:

2.4.1: A solution of BuLi or BH3/THF (10 mL, 1 mole,2.5 M in hexane) was cannulated into addition funnel or into a solution A in solvent B

2.4.2: A solution of BuLi or BH3/THF (10 mL, 1 mole,2.5 M in hexane) was added into a solution of A in solvent B via cannula, dropping funnel or syringe over a period of hrs

 

Part 3: 反应

3.1: 无溶剂反应

A (1 g, 1 mol) and B (1 g, 1 mol) were dissolved insolvent C, evaporated to dryness and heated for x hours at x oC

 

3.2: 催化量的反应

A (20 mL, 142 mmol) and catalytic amount (a traceamount or two drops) of B were added into a solution of C (4.549 g, 46.4mmol) in D(120mL) at 0 oC

 

3.3: 闷罐反应或封管反应

A solution of A (x g, x mol) in methanol (x mL) saturated with NH3 (or other gas such as: CO, CO2, H2S) was stirred under 50 Psi at x oC for x hours in a 50 mL of sealed tube or autoclave.

 

3.4: 有气体参与的反应

3.4.1: A solution of A (x g, x mol) in methanol (xmL) saturated with HCl was stirred at x ℃.

3.4.2: Ozone was bubbled into a solution of A (x g,x mol) in MeOH (x mL) at x oC for 15 minutes. After excess O3 was purged by N2, Me2S (x mL) was added at x oC.

3.4.3: Gas was bubbled into a solution of A (x g, xmol) and B (x g, x mol) in solvent C (x mL) at x oC for x hours.

 

3.5: 混合溶剂参与的反应

3.5.1: To a solution of A (x g, x mol) in a mixture of solvent B (mL) and solvent C (x mL) (or a mixed solvent of B and C) was added D (x g, x mol) at x oC, the reaction mixture was allowed to stir(reflux or heat) for x hrs.

3.5.2: To a solution of A (x g, x mol) in 10: 1 aqueous acetone (x mL) was added B (x g, x mol) followed by addition of C(x g, x mol), the reaction mixture was allowed to stir (reflux or heat) for x hrs.

 

3.6: 分水器分水的反应

3.6.1: A (x g, x mol) and B (x g, x mol) in benzene or toluene (x mL) were refluxed for x hours with azeotropical removal of water.

3.6.2; A mixture of A, B and TsOH.H2O (56.91 g, 0.3mol) in toluene (400 mL) was heated to reflux and remove water by Dean-Stark trap. 

 

3.7: 氢化反应

To a solution of A (x g, x mol) in EtOH (x mL) was added Pd-C or Ra-Ni or Pd(OH)2/C (10%, x g) under N2. The suspension was degassed under vacuum and purged with H2 several times.

3.7.1: The mixture was stirred under H2 (x psi) at x℃ for x hours. [氢化瓶或高压釜]

3.7.2: The mixture was stirred under H2 balloon at x℃ for x hours. [常压氢化如气球反应]

3.7.3: A mixture of A (x g, x mol) and Ra-Ni (x g)in EtOH (x mL) was hydrogenated under 50 Psi of hydrogen pressure for xhours at room temperature.

 

Part 4: 反应条件或过程描述

4.1: The reaction mixture (solution or suspension) was stirred at 5oC for 2 hrs and then kept at room temperature (or ambienttemperature) for another 2 hrs (or overnight)

4.2: The reaction mixture (solution or suspension) was refluxed (heated to reflux) or heated at 60oC for 2 hrs (or overnight)

4.3: The reaction mixture (solution or suspension)was allowed to reflux (or heat to reflux) for 2 hrs (or overnight)

4.4: The reaction mixture (solution or suspension)was allowed to warm to temperature during 2 hrs and reflux (or heat toreflux) for 2 hrs (or overnight)

 

Part 5: 反应监测

5.1: Taking sample from the reaction mixture(solution or suspension) by dropping tube or syringe. After workup, check the reaction via TLC, LC-MS or HPLC etc.. (预处理)

 

5.2: 反应状态或终点描述

5.2.1: The reaction was complete (incomplete or messy) detected (determined or confirmed) by TLC (PE/EtOAc 4:1), LC-MS,HPLC or NMR

5.2.2: TLC (PE:EtOAc=1:1) or HPLC (107757-088-1)showed or indicated that the reaction was complete.

5.2.3: TLC (PE:EtOAc=1:1) or HPLC (107757-088-1)showed the starting material was consumed completely.

5.2.4: TLC (PE:EA=1:1) or HPLC (107757-088-1) showed the reaction didn’t work at all or most of starting material was still remained.

5.2.5: The starting material was consumed completely, but no desired compound was detected or determined by MS(106657-078-1) or LC-MS (106657-078-1).

5.2.6: Several spots were shown on TLC.

5.2.7: Only a trace amount of desired compound was detected by MS (106657-078-1) or LC-MS (106657-078-1) or HPLC(106657-078-1) or TLC (PE:EtOAc=1:1).

5.2.8: The desired compound could not be isolated, separated or purified by chromatography or prep. HPLC due to poor yield or poor solubility.

5.2.9:1H NMR (106675-010-2) or MS confirmed the obtained (or isolated) compound is not the desired compound. The reaction was failed.

 

Part 6: 反应淬灭

6.1: An aqueous solution of A (10 mL) was added dropwise into the reaction mixture once the reaction mixture (solution orsuspension) was allowed to warm (or cool) to -5oC or room temperature(ambient temperature).

6.2: The hot (or cold) reaction mixture (solution orsuspension) was poured into water (ice water) or poured onto ice.

6.3: The reaction mixture (solution or suspension) was concentrated (distilled) under reduced pressure (in vacuum) or evaporated to remove MeOH (THF; DMF etc.) or excess SOCl2 (reagent). Then the reaction residue (or the residual) was diluted with solvent and poured into water (ice water) or poured onto ice.

 

Part 7: 分液提取

7.1: The residue was partitioned between ethylacetate (100 mL) and 1N aq. HCl (50 mL). The separated organic layer was washed with water, dried over (Na2SO4 or MgSO4) and evaporated to dryness.

7.2: After quenching the reaction, the reaction mixture was poured into separatory funnel and separated.

7.3: The aqueous layer (or phase) was extracted with organic solvent (40 mL) twice (or X times). The combined organic layers were (or the organic layers were combined and) washed with an aqueous solution of A (50 mL) or water and dried over Na2SO4 or MgSO4.

7.4: The combined aqueous layers were extracted with solvent (40 mL) twice (or X times) to remove neutral impurities. The aqueous phase was acidified (or basified) with aqueous HCl (or NaHCO3) till PH = X and extracted with organic solvent.

7.5: The combined organic layers were (or theorganic layers were combined and) washed with an aqueous solution of A (50mL) or water and dried over Na2SO4 or MgSO4.

 

Part 8: 浓缩蒸发

8.1: After filtration via filter paper or Celitepad, the organic layer (or extract) was concentrated under reduced pressure (or in vacuum) or evaporated to dryness to provide (afford; giveor yield) an oil (or foam) (which solidified on standing) or a white solid.

8.2: The organic layer (or extract) was filtered and concentrated under reduced pressure (or in vacuum) or evaporated to dryness to provide (afford or give) A (10 g, 0.5 mole) an oil (or foam)(which solidified on standing) or a white solid.

8.3: After removal of solvent by evaporation or concentration, A (10 g, 0.5 mole) was obtained (or prepared) an oil (orfoam) (which solidified on standing) or a white solid.

8.4: The extract in CH2Cl2 was evaporated to dryness and then swapped with toluene to remove residual CH2Cl2.

 

Part 9: 几种常见的后处理描述

9.1: The reaction mixture or solution was concentrated to dryness. [适用于反应液不需要quench]

9.2: After the reaction mixture was cooled to 0 ℃, the reaction mixture was quenched by addition of xmL of H2O, followed by x mL of 15% aqueous NaOH. After being stirred at room temperature for x hour, the solid was removed by filtration (orthe mixture was filtered)

through Celite pad to remove by-product). The filtrate was concentrated to dryness to give crude product. [LiAlH4 反应的经典后处理]

9.3: The mixture was diluted with water (x mL), neutralized with solid K2CO3 until no CO2 was evolved. [适用于酸性反应液的后处理]

9.4: The suspension was filtered through a pad of Celite or silica gel and the pad or filter cake was washed with EtOH (xmL×x). The combined filtrates were concentrated to dryness to give product(x g, x%) as. [适用氢化反应的后处理, 或者难于过滤的反应液的后处理, 但

要注意的是这里需要的是滤液而不是固体才能添加助滤剂]

9.5: The reaction mixture was poured into x mL of ice-water carefully and the organic layer or phase was separated. [产物在有机相里]

9.6: The reaction mixture was poured into x mL of ice-water carefully and the aqueous phase was washed with Et2O (x mL×x) [产品在水相] and acidified with 1NHCl to pH=3. The resulting precipitate was collected by filtration or the resulting solution was extracted with EA

(x mL×x).

9.7: The reaction mixture was filtered and the filter cake was washed with x mL of solvent, dried in vacuum to give or afford product. [这里需要的是固体而不是滤液]

9.8: The reaction mixture was quenched with x mL of saturated aqueous NH4Cl. The resulting solution was extracted with EA (xmL×x). [适用于丁基锂等活泼金属有机物的后处理]

9.10: The residue was triturated with ether and filtered to afford a white solid. (磨碎)

9.11: The crude product was purified by prep. HPLC to give A as a colorless thick oil which was solidified on standing. (静止固化)

9.12: After prep. HPLC purification, the eluent was concentrated or evaporated to remove organic solvents. The residual aqueous solution was lyophilized to give a white solid. (冷冻干燥)

9.13: After concentration, the crude product was used directly for the next step without purification.

 

Part 10: 产品的纯化

10.1: The crude product was purified by silica gel chromatography eluted with PE: EtOAc=10:1 to give product (x g, x%) as yellow solid.

10.2: The crude product was purified by recrystallization (or recrystallized) from x solvent (x mL).

10.3: The crude product was distilled in vacuum (xoC, x pressure) to afford pure product (x g, x%) as colorless liquid.

10.4: The crude product was pre-purified by column chromatography followed by prep. HPLC purification or re-crystallization to afford pure product.

本文非原创内容，如涉及版权问题请联系本号删除

近期干货资料分享汇总

(1) 这个期刊的化学实验操作重复不出来，100%是你的问题！9000页Org.Synth文献汇总

(2) 史上最全反应机理，最全钯催化，最全吲哚化学，最全吡啶化学总结一锅端

(3)诺奖得主E.J. Corey学生，走进合成界天才化学家Phil.Baran世界：千页毕业论文，Seminars，文章合集等

(4) 有机合成和药物研发必收藏：>100种膦配体结构，缩写，CAS号，性质，以及应用汇总

(5) 有机溶剂极性表（应该是最全的）

(6) 600个有机反应卡让你轻松牢记有机化学反应

(7)常用溶剂的沸点、溶解性和毒性

(8) ChemDraw使用技巧包

(9) Scifinder和Reaxys使用技巧

(10)国内外大牛：施章杰，余金权等人合著的C-H活化巨著

(11)有机人名反应机理软件版，查询使用更方便

(12)真香！诺贝尔奖得主 E.J.Corey推荐的有机人名反应 ，对应的中文版本你有了么？

(13)上海有机所马大为院士等合著的铜催化900页巨著

(14)辉瑞总结的接近400个上市药物的合成路线汇总

(15) 如何设计有机合成路线，一文搞定

(16)一文在手，化合物核磁解析不愁！

(17) 有机硼酸（酯）制备和应用汇总

(18) Suzuki，Buchwald等偶联如何实现最佳条件的快速选择，指导性总结分享

(19) 最全官能团转化总结

(20) 邢其毅有机化学讲义，经典无需赘言

(21) 哈佛大学，有机化学界泰斗级人物D.A. Evans有机化学717页讲义

(22) 150个重要的有机反应

(23) 2020最新版Reaxys培训教程

(24) 有机合成入门必备！265条全合成的路线！

(25) 制药巨头Merck版人名反应

(26) 来自药明的柱层析技术

(27) 全套！H谱，C谱和F谱教程，合成人珍藏版！

(28) Reaxys高级检索技巧

(29) 有机合成，无水无氧实验操作讲解

(30) 24种必掌握反应，来自哈佛大学牛人Myers的总结，非常全面，值得打印出来慢慢学！

(31) 有机反应机理中的箭头和方向怎么画？机理学习中最头疼的地方

(32) 最通俗易懂的有机人名反应中文总结

(33) 有机合成中的保护基化学，1400页总结，全了！

(34) 顶刊Nature等，F/Cl/Br代反应1000页总结

(35) 有机合成中的重排反应总结

(36) 不得不了解的金属有机化学，比如钯催化等

(37) 有机化学怎么学？熟练掌握各种官能团的转化

(38) 钯催化偶联500页总结，涉及碳杂键，Suzuki，Negishi，和Heck等偶联

(39) 杂环化学及其应用总结分享，研发和制药必备资源